How To Root Your Samsung Galaxy S5, Step By Step

Published on
  1. The first thing that you need to do is turn the USB debugging and charge only mode off. This will allow the computer to communicate through a USB cable and it will calm down the Samsung Galaxy S5 when it is connected to the PC.
  2. Download Ubuntu Desktop 32 , write it to a CD and then boot it from the CD. Once you are in the boot screen, click on the option that says Try Ubuntu without any change to your computer and wait until it finishes booting.
  3. After it’s done booting you may download and unzip the following script:

> cd ~

> mkdir aahk

> cd aahk

> wget

>unzip aahk-

  1. Have the Samsung Galaxy S5 connected to the computer and then run this script to root Samsung Galaxy S5: > sudo ./
  2. You may then downgrade the Samsung Galaxy S5 to Android version 2.3.3.
  3. Once it is downgraded it should be ready to be rooted. You need to set the USB debugging and charge-only mode one more time. Connect the two Samsung Galaxy S5s and then run the script again.
  4. The next thing to do is to simply disable or turn off the Fast Boot option and then to make a bacup of the current Android 2.3.3 image.
  5. Before you can install custom ROM you need to clean up data and cache partition as the ROM firmware actually has a different data. You can do this by going to the ClockworkMod main menu and then selecting “wipe data/factory reset” and “wipe cache partition”.
  6. You may then install custom ROM from ZIP file by choosing the “install zip from sdcard” option in the ClockMod recovery.
  7. The last step is optional and during this phase you need to install gapps from zip file.

If you want an easiest process to perform this particular task you may take a look at the most trusted application today!

How To Root Your Samsung Galaxy S3, Step By Step

Published on
  1. Before you start doing anything, you need to remember that rooting your Samsung Galaxy S3 will delete all your data , settings and internal storage.
  2. The first thing that you need to do is to simply power your Samsung Galaxy S3 off.
  3. Go to the Volume Down and Power buttons and hold them down simultaneously in order to boot into fastboot mode.
  4. Get a micro-USB cable and use it to connect your Samsung Galaxy S3 to the PC once you are already in fastboot mode.
  5. If you are using Windows you have to be very sure that the correct drivers are correctly installed. One indication that it is installed properly is that when you will see the “Android ADB interface” in the Device Manager. If you are using Linux and Mac just skip this step.
  6. The next thing that you should do is to simply download and then unzip to nexussrootICS folder.
  7. Open up the command prompt and then root Samsung Galaxy S3 by typing the following:

For Windows: fastboot oem unlock

For Mac: ./fastboot-mac oem unlock

For Linux: ./fastboot-linux oem unlock

  1. You may then press the Volume Up button and then followed by the Power button in order to unlock Samsung Galaxy S3. You should be seeing “LOCK STATE-UNLOCKED” text on your screen by now.
  2. Type the following:

For Windows : Fastboot flash recovery twrp-crespo-2.0.0RC0.img

For Mac: ./astboot-mac flash recovery twrp-crespo-2.0.RC0.img

For Linux: ./astboot-linux lash recovery twrp-crespo-2.0.0RC.0.img

  1. Go to the fastboot menu and then select Recovery, Mount and then Mount USB Storage.
  2. Duplicate the to your device’s internal storage , click on Unmount, Install, and then Flash now.
  3. Choose Reboot System and check if the device already shows the Superuser app. Once it does it only means that the unit has already been successfully rooted.

Why don’t you check out the easiest method in doing the process?

Superuser: The Samsung Galaxy S6 Root Access Manager

Published on

When you root your Samusng Galaxy S6, you are obtaining ‘root’ or “superuser” access. What it means is, you are gaining privileged control that will allow you to access and change anything you want on your phone.

Oftentimes, manufacturers and providers have measures in place to limit what you can do with your device.

Though the practice is not as common nowadays, the manufacturers and providers sometimes lock the bootloader of the phone, preventing you from doing things like installing your own operating system.

This means you are stuck with whatever features come with the version of Android that comes preinstalled on your phone.

By unlocking the bootloader, and rooting your Samsung Galaxy S6, you are able to get past these security measures and take the already versatile android operating system, to a whole new level of customizability.

However, there is a certain risk to gaining root access on your Samsung Galaxy S6.

Though, the limitations put on devices are oftentimes unreasonable, they also serve to protect your device from malicious threats.

When you bypass those security measures (which is what happens when you root S6), you could potentially be opening the floodgates for malicious attacks on your Android device.

Malicious attacks can come in many forms. One of the most common is through seemingly harmless apps, especially those obtained from outside the play store.

Because you have root access to your Samsung Galaxy S6, viruses hidden in apps can take advantage of that to do things like steal your important information.

What does Superuser do?

That’s where Superuser comes in. Superuser is basically the application control panel for root level access. What it does is it manages the superuser (root access) permissions of the applications on your phone.

The Superuser app shows you what apps you have root-level access. When an app without root access tries to complete an action that requires root access, Superuser will display a prompt asking you if you want to grant the app permission. You can also make super user automatically deny or allow all requests for root access.

With root access, a lot of the potential threats to the security of a rooted Samsung Galaxy S6 are removed, allowing you to enjoy your rooted Android phone to the fullest.

All Steps to Root LG G3 Explained

Published on

1 Have a formal version of the firmware installed

An example of such firmware is I9505XXUAMDM. This also works on XXUAME2 versions and higher. As we have already explained, this process applies to all LG G3 until the manufacturer says “cut the tap” with new updates and new official firmware that prevent this maneuver, if the time ever came.

2 Install the USB Drivers for LG G3

The next step is to install the LG G3 USB drivers on your computer. Typically installed automatically when you connect the device using Windows 7 or 8 (or having previously installed the Samsung Kies), but if it has not been so you can install them manually by downloading them.

3 Backup

It is very important, although not compulsory. We must make a backup of the entire system, as it can save the phone if a mishap occurs during the process. As client, you can use Samsung’s own Kies to back up your system, but if you make it manually, you will have more options regarding what to copy and what to restore in the future. In the Google Play Store, you can find many free to create backups of your phone applications.

4 Have a charged battery of at least 85%

This is necessary to make sure you do not run out of battery in case the process is lengthened more than it should. Interruptions would have some consequences on the terminal.

If you’ve come this far and you followed all the steps, we can get down to work. So far, what we’ve done was to prepare the phone and the PC to begin the real process of rooting the LG G3, which consists in becoming a superuser by installing the files with the help of ODIN.

Now you can download the most important files from this link to root LG G3 as well as getting all the required steps to take in order to use that software to gain LG G3 root access.

The process is much like any other official firmware installation (not custom) via ODIN.


Custom Root For LG G3 By CF-Auto-Root

Published on

In this article / tutorial, we are going to explain how to ROOT and then perform an installation of CUSTOM FIRMWARE (ROM Modified) to LG G3. The tutorial is divided into 3 parts (pages), the first being intended to ROOT, while both the second and the third correspond to a Custom ROM Firmware installation through a process called “flashing” the firmware.

If your only interest is to make a phone depersonalization imposed by the firmware of the operator (Movistar, Orange, etc), a process called Debranding is more suited for you. We recommend you visit this other tutorial to do it easily. However, if what you want is to install the official ROM downloaded from SamMobile we recommend flashing using the PIT file as we explain in this tutorial.

The root process outlined here is valid for all LG G3 smartphones, regardless of the version of firmware installed. The process of flashing a custom firmware presented here is valid for all those that support Custom ROM by ZIP (not Odin), so it is a ‘universal’ installation process.

NOTE: These firmware and ROM here are only valid for the model LG G3 (Quadcore Snapdragon) sold in Europe and North America. If your model is LG G3 (OctoCore Exxynos), you must use the firmware presented in this other tutorial.

Once we have our LG G3, it is time to root the terminal. You can get root permissions just by following these steps.

What is ROOT and superuser?

A LG G3 root is a superuser, a user with special permissions. A root user can do things that a standard user can’t. For example, he can install applications that could not be installed on standard devices. The process varies depending on the terminal and the Android version installed, but it is usually very simple and should not take more than 5 minutes. Once completed, you will only accept root permissions in a window that appears in the applications that require them. For the rest, nothing will have changed.

Becoming a root user does not invalidate the warranty and is reversible. In the “negative”, the power to act more “expert” level can lead you to change something that could damage your phone irreversibly so make sure you know what you are doing.



For that we need a tool for automatic rootING, which has previously been used by many users on other Samsung devices running the Android operating system, proving that it is one of the simplest methods and involves few risks. This tool called CF-Auto-Root

How To Root LG G3 In 2 New Ways

Published on

You are the proud owner of a LG G3 and you want to root it. Laurie explains step by step how to unlock its bootloader and root your precious Android smartphone.

This guide will explain how to unlock the bootloader and root your precious LG G3.

Thus, you can:

– install a custom Android ROM (personally I love CyanogenMod, but there are others on XDA Developers)
– fully back up your system (with Titanium BackUp for example)
– or delete some unwanted applications, that manufacturers have added beforehand to the smartphone

We will make the necessary actions using the software “LG G3 Root Toolkit,” now available in 1.6.1.
This is the easiest to use tool that I’ve found to date.

Know that rooting LG G3 has and carries risks. APLN does not take any responsibility for this matter, so you’re the only responsible for your actions.


  1. Download and install the LG Root Toolkit (it’s a self-executable).
    2. Once this is done, run the utility.
    3. Click “Change” to select the build number. If you haven’t already known this, go to the settings menu of your Androphone, then  select “About.” The number  is specified there.
    4. Enable debugging.  To do this, go to phone settings, then “Developer Options”. Tap the lever located above and accept the dialog. Finally, select “Android Debug” and accept a second time the dialog box. If this section does not appear above “About”, go to it and tap “Build Number” until it tells you that “you’re a developer.”
        5. Uninstall all the old drivers. To do so, click on “Full Driver Installation Guide – Automatic + Manual” and then apply the instructions below:
    – Connect your LG G3 on your PC. Recall that debugging must be enabled.
    – Run “Device Manager” at the bottom of the window. Right-click on your device and select “Uninstall”.
  2. Unplug your device.
    7. Then run “USBDeview”. After selecting all the drivers bearing the indication “ADB”, do a right-click and choose “Uninstall Selected Devices”.
    8. Finish by restarting your Androphone.
    9. Now install drivers using the second stage. (“Step 2″ tab at the top of the window).
    In order to succeed, the software will recommend one of three solutions. I recommend method 3 (RAW drivers). Directives to follow are indicated for each of them
    10. Finally, in “Step 3″ tab, we will see if the drivers are configured correctly.
    So plug in your phone, make sure debugging is operational, then press the “Full Driver Test” button. A success message should appear. However, if you get a failure notification, then your LG G3 is not recognized by Windows. Check if it is connected with the original USB and retry the operation by changing the port cable. Otherwise, try the installation again with the remaining two techniques.

Perform a Backup

Make sure to do a backup before starting the whole process because it will erase all your data. Fortunately, our utility has a comprehensive and practical function to make a backup of the SD card, its applications, its SMS, contacts … Basically, everything you want!

For example, creating a file containing your applications is very simple:
– Check the option “System apps + data” (applications + system data) and “Shared data” (shared data) if you wish. Then click “Create Android Backup File”.
– As suggested in the window, turn your device into airplane mode (“Settings”> “more …”) and click “Ok”.
– Choose a name and a location for your file and continue.
– Validate the backup on the computer and your device. Encrypting the file with a password is not required but you can still do it if you like.

Unlocking the Bootloader

– Click “Unlock” and press “OK” if you are ready to continue. Your LG G3 restarts automatically showing a confirmation screen.
– Press “Yes”.
– If you find yourself in Fastboot mode and you read “Lock State – Unlocked” written in red, it means that the bootloader is indeed unlocked.

Don’t forget to re-enable debugging in the settings!

Rooting the LG G3  

– Select the “Custom Recovery” and click “Root” box.
– A dialog box opens: it warns you that the script is about to Root LG G3. Confirm this action.

Congratulations dear LG friends, the root has successfully been performed :-). Click “Ok”, then go to the last step.

Restoring Data

Just click on “Restore” and select the file .ab format.
Wait a moment, reboot your phone, and you go have fun with your dear applications.

This tutorial is finished, I would be more than happy to answer any questions you have. I will try to help those with difficulties.

2 Methods To Root The LG G3!

Published on

We have previously told you about the LG G3 tablet launched by Amazon. To get all the updates on this device, you are invited to read the article at this LINK where you can find the whole collection of articles dealing with this device.

After this brief introduction, we’d also like to tell you that the LG G3 is one of the devices with the highest number of sales of the moment.

We speak now of the device that is equipped with a 1.2 GHz processor and 1 GB of RAM, resulting in a 40% improvement over its predecessors. A 7-inch display adapted for prolonged reading and improved navigation. It is made of a lightweight and durable material not carrying any kind of discomfort during transport.

You can connect it to a Wi-Fi connection allowing access to various pre-installed social supports: Facebook, Twitter, Gmail and many more, not to mention the ability to download thousands of books, multimedia, applications and games. All this accompanied by being able to store everything in the Cloud without any problem regarding the space as it is unlimited.

Well, after talking about some of the features of this device, let’s return to our guide.

Today we will explain how to unlock and obtain ROOT permits of your LG G3. This is possible thanks to a script that gives many features.

Its name is LG G3 Utility and here is what you can do:

– Open a tutorial to help you root LG G3, then Lock and unlock the device following their instructions.
– It allows you to log in as root user to the device.
– Automatically detect the ADB and Fastboot mode for Online and Offline.
– Automatic detection of the bootmode on the device.
– Ability to manage the bootmode.
– Ability to install the TWRP Recovery.
– Auto download file directly from Amazon.
– Ability to install the Google Apps and GoLauncher EX.

Here’s how:

– Download the files directly to your computer.
– In the file, there will be the drivers required for the functioning of the ADB and Fastboot.
– For installation you can just connect your device and wait for the computer to recognize it.
– Start the .bat file from the terminal.
– To access the terminal from Windows you just go to Start and type CMD in the command of white space
– This will open a black window where you can navigate using the commands cd and ls
– Then follow the instructions which will list the script.

This short walk will get, as previously mentioned, the root permissions on the LG G3.